Collection: Picture hanging systems with lighting
STAS picture rail, equipped with 12 volt power supply wires. Compile a complete STAS multirail picture hanging system by following these steps:
1. Multirail: indicate the number of rail segments of 200 cm you need. Please respect a maximum of 8 segments per adapter. The included installation kit contains all necessary plugs, screws and a straight rail connector to correctly install the rail.
2. Armatures: Choose the amount and model of lighting armatures you want.
3. Lights: Choose the amount and type of LED lights you want. They are not included with the armatures.
4. Power adapter: supplies electricity to your multirail system, one adapter is suitable for 16 meters of rail and depending on the wattage a number of LED lamps. Have a look at the overview to decide which adapter you need.

5. Corners: For each corner you have in the room, add a corner connector to your order. Only for outer corners, also add a corner cap.
6. Hooks and cords: finally, choose STAS hooks and cords to complete the system and hang your artwork.
Would you like to install more than 8 segments / 16 meters of rail and / or more than the amount of LED lamps in the overview above? Be sure to use a second adapter. CAUTION!: if you use multiple adapters, make absolutely sure you create independent circuits.
Consult the brochure below for more info on the options available. Should you come across any issues while installing the STAS multirail or accessoiries, consult this manual for common solutions. And of course, don't hesitate to contact us if you need help!